Emulsifier Machine(5L/10L/20L)
Emulsifier Machine(5L/10L/20L)
Emulsifier Machine(5L/10L/20L)
Emulsifier Machine(5L/10L/20L)
Emulsifier Machine(5L/10L/20L)
  • FEATURES
  • PARAMETER
  • CONFIGURATION
  • APPLY

This machine consists of: oil tank, water tank, vacuum homogeneous emulsifying machine, heating system, mixing system, vacuum system, electric lifting system, operation control cabinet, piping system. It is the most suitable equipment to produce high-grade skin care creams or other creams products.

Oil tank capacity 42L; water tank capacity 42L; primary pot capacity 60L, working volume 50L; limiting vacuum -0.09MPa.

Size: Complete machine: 1500mm×600mm×1900-2500mm

Oil and water tank: 1200mm×600mm×1100mm

Material: 304 stainless steel. Inner wall, jacket, outer layer all made by 304 stainless steel, inner and outer are polished, the surface handled by special light treatment.

Oil tank and water tank are both double deck, inner wall thickness 3mm, middle and outer thickness 2mm.

Heating system: interlayer electric heating power 4KW, the outer layer covers by asbestos to insulate heat, reducing heat lost and avoiding scalding employees.

Mixing system: both oil tank and water tank assemble disperser of 0.55KW, to make the water and oil heated more quickly and evenly.

Vacuum Emulsifying pot: made of three decks 304 stainless steel. Interlayer thickness 3mm, middle layer thickness 3mm, outer layer thickness 2mm, special light treatment The homogenizer is on the top of the emulsifying pot, adjustable time setting depends on the product homogenization need, voltage 380V, power 2.2KW, made in Shanghai and uses German technology, the highest speed 2800 rev / min. The material moves in a high speed between the rotor and stator, what can engender a strong hydraulic shear power to dispersing materials, meanwhile it can engender centrifugal power to extrude, milling, crash the material, ultimately make the material mixing, stirring, diminution to the desired requirements. A lighting hole on the pot cover to observe the states of homogeneity. Entrance for spots of material provide possibility to add essence and suchlike materials. Either pour-out the material by tilting the pot or from the bottom, the latter way can make the materials enter the filling machine directly for quantitative filling. Easy to clean.

Vacuum system: voltage 380V, power 0.75KW, materials in water tank and oil tank are absorbed into the primary pot in vacuum. The rotary-vanepump is made by Haibo Kang Company in Shanghai, which can remove the air bubble to improve the homogenizing effect.(circulating cooling by water)

Mixing system: voltage 380V, power 1.1KW, 10-120 rev / min. Monitoring with transparent filter, scraping the interlayer when mixing, frequency control.

Heating system: 6KW electric heating device attaching at the bottom. Heating with temperature display, easy to control.

Electric lifting: voltage 380V, power 1.1KW. Lifting is easy to operate, so the material can be effectively emulsified in a closed condition.

Control System: The control system is equipped with digital time relay device, so it can adjust time and speed of homogenizer based on different material. All control buttons are concentrated together,clear at a glance.

An emulsifier machine is a specialized piece of equipment designed to achieve efficient and controlled emulsification of different substances. These machines are engineered to blend and disperse immiscible ingredients, such as oil and water, to create stable and uniform emulsions. With their advanced technology and innovative features, emulsifier machines provide manufacturers with a reliable solution for achieving superior emulsification results.



Pot lid feeding system


    This device can be connected to the tube using vacuum system, the material into the emulsifying pot, inner wall and outer are 304 high quality stainless steel, inside and outside fine casting, surface special light processing.



stirring system


  The material moves in a high speed between the rotor and stator, what can engender a strong hydraulic shear power to dispersing materials, meanwhile it can engender  centrifugal power to extrude, milling, crash the material, ultimately make the material mixing, stirring, to the desired requirements.



Oil And Water Tank


Oil tank and water tank are both double deck, inner wall thickness 3mm, middle and outer thickness 2mm.both oil tank and water tank assemble disperser of 0.55KW, to make the water and oil heated more quickly and evenly.


     In addition to,If you're looking for vacuum emulsifying mixer price,vacuum emulsifying mixer machine,vacuum homogenizer cream mixer,emulsifier machine,emulsifying mixer,vacuum emulsifier,vacuum homogenizer mixer,vacuum homogenizer,double planetary mixer,silicone mixers,planetary vacuum mixer,vacuum planetary mixer,ross planetary mixer,silicone mixer,ross double planetary mixer,industrial planetary mixer,planetary mixer pharmaceutical,silicone planetary mixer,silicone mixer machine,planetary mixer in pharmaceutical industry,pharmaceutical planetary mixer.it is a pleasure for you to visit our website anytime.


     In short, we will try our best to provide you with satisfactory service,the following is our customer feedback.


Device Name

10L Emulsifying Machine

Working ability

Design volume: 13L

Working volume:10L

Minimum operating volume: 3L

Material

Contact Parts: 304 stainless steel

thickness: 3mm

Interlayer: 304 stainless steel

thickness: 3mm

Outer layer: 304 stainless steel

thickness: 2mm

Weight

350kg

Size

1100mm×600mm×1500 mm

Service life

10 years

Stirring

Fixed paddle stirring, PE blade Scraping

Homogenizer

Power: 0.75KW

Motor speed: 2800r/min

Particle size: 0.2-0.6um

Uncapping

Electric lift

Heating

Electric heating

Discharge

Tilt pot discharge and bottom valve discharge

Process parameters

Working pressure: -0.09MPa

Flimsy parts

1 year renewal except artificial

Warranty period

1 year


Inverter

Taian (Taiwan)

Motor

Huadiao (Nanjing)

Reducer

Jiahe(Zhejiang)

Vacuum

Boer Kang (Shanghai)

304 stainless steel

Taigang(Tianjin)

Main electrical components

Zhengtai(Zhejiang)

Product Catalog