Rotate Oil Filling Capping Machine
Rotate Oil Filling Capping Machine
Rotate Oil Filling Capping Machine
  • Introduction
  • Technical parameter
  • Setup list
GF18-4 triple machine filling and capping in one, is on the base of introducing, digesting and absorbing foreign advanced technology.
It is mainly used for oil without gas filling and capping. Its structure is advanced, stable, reliable, safe operation, convenient maintenance, the use of frequency conversion speed control, high production efficiency, is the ideal equipment for small and medium sized beverage factory.
The production process of the machine are as follows: conveyor chain and triple a machine directly connected, bottles by conveyor chain through a screw into bottle shifting wheel by shifting the bottle star wheel transfer to three synthetic filling machine, into the filling machine of the bottle by retaining the bottom of the bottle holder.
The whole machine equipment adopts a closed window, and the sealing window height is higher than the highest point of the equipment, and there is a proper passage in the bottle.

Model MIC-18-4
Filling heads 18pcs
Capping heads 4pcs
Volume 0.1-6L
Production capacity 1000-2500bottle/hr base on 4000ml
Filling method Normal pressure
Power 1.5kw  380V/50HZ(According to customer)
Air pressure 0.7Mpa
Gas consumption 0.8m³/min
Water consumption for bottle washing 1.5-2T/H
Wash bottle water pressure 0.2~0.25 Mpa
Weight 2500kg
Dimension 2300×1400×2500mm
Electrical configuration
Touch screen DELTA
Frequency converter MITSUBISHI
PLC MITSUBISHI
Contactor, breaker DELIXI
Proximity switch DELIXI
Photoelectric switch DELIXI
Bearing Harbin
Relay OMRON
Barometer AirTAC
Air cylinder AirTAC
Solenoid valve AirTAC
Product Catalog