This machine consists of: oil tank, water tank, vacuum homogeneous emulsifying machine, heating system, mixing system, vacuum system, hydraulic lifting system, operation control cabinet, piping system. It is the most suitable equipment to produce high-grade skin care creams or other creams products.

Oil tank capacity 140L; water tank capacity 210L; primary pot capacity 350L, working volume 300L; limiting vacuum -0.09MPa.

Size: Complete:1100mm × 600mm × 1500mm Oil and water tank: 2000mm×800mm×1700mm

Material: 304 stainless steel. Inner wall, jacket, outer layer all made by 304 stainless steel, inner and outer are polished, the surface handled by special light treatment.

Oil tank and water tank are both double deck, inner wall thickness 4mm, middle and outer thickness 4mm.

Heating system: interlayer electric heating power 6KW, the outer layer covers by asbestos to insulate heat, reducing heat lost and avoiding scalding employees.

Mixing system: both toil tank and water tank assemble disperser of 0.75KW, to make the water and oil heated more quickly and evenly.

Vacuum Emulsifying pot: made of three decks 304 stainless steel. Interlayer thickness 4mm, middle layer thickness 4mm, outer layer thickness 3mm, special light treatment The homogenizer is on the top of the emulsifying pot, adjustable time setting depends on the product homogenization need, voltage 380V, power 4KW, made in Shanghai and uses German technology, the highest speed 2900 r / min. The material moves in a high speed between the rotor and stator, what can engender a strong hydraulic shear power to dispersing materials, meanwhile it can engender centrifugal power to extrude, milling, crash the material, ultimately make the material mixing, stirring, diminution to the desired requirements. A lighting hole on the pot cover to observe the states of homogeneity. Entrance for spots of material provide possibility to add essence and suchlike materials. Either pour-out the material by tilting the pot or from the bottom, the latter way can make the materials enter the filling machine directly for quantitative filling. Easy to clean.

Vacuum system: voltage 380V, power 1.5KW, materials in water tank and oil tank are absorbed into the primary pot in vacuum. The rotary-vanepump is made by Haibo Kang Company in Shanghai, which can remove the air bubble to improve the homogenizing effect.(circulating cooling by water)

Mixing system: voltage 380V, power 2.2KW, 10-120 r / min. Monitoring with transparent filter, scraping the interlayer when mixing, frequency control.

Heating system: 8KW electric heating device attaching at the bottom. Heating with temperature display, easy to control.

Hydraulic lifting: voltage 380V, power 3KW. Lifting is easy to operate, so the material can be effectively emulsified in a closed condition.

Control System: The control system is equipped with digital time relay device, so it can adjust time and speed of homogenizer based on different material. All control buttons are concentrated together,clear at a glance.

Pot lid feeding system

This device can be connected to the tube using vacuum system, the material into the emulsifying pot, inner wall and outer are 304 high quality stainless steel, inside and outside fine casting, surface special light processing.

Emulsifying head

Emulsify material by high speed spinning, using 304 high quality stainless steel, no corrosion, and easy to clean and replace.
The material moves at high speed in the clearance between the multi-layer rotor and stator, forming strong hydraulic shear, disperses the material, and generates centrifugal extrusion, grinding, collision and other comprehensive forces.

Mixing system

Equipped with transparent observation hole, frequency conversion speed regulation wall scraping mixing, voltage 380V, power 0.55KW,10-120 RPM, so that the material fully mixing, mixing, refining to meet the ideal requirements. According to different products arbitrary set of homogenization time.

If you want to know more models of filling machine, you can refer to the table below:

    In addition to,If you're looking for vacuum emulsifying mixer price,vacuum emulsifying mixer machine,vacuum homogenizer cream mixer,emulsifier machine,emulsifying mixer,vacuum emulsifier,vacuum homogenizer mixer,vacuum homogenizer,double planetary mixer,silicone mixers,planetary vacuum mixer,vacuum planetary mixer,ross planetary mixer,silicone mixer,ross double planetary mixer,industrial planetary mixer,planetary mixer pharmaceutical,silicone planetary mixer,silicone mixer machine,planetary mixer in pharmaceutical industry,pharmaceutical planetary mixer.it is a pleasure for you to visit our website anytime.

     In short, we will try our best to provide you with satisfactory service,the following is our customer feedback.

Mixing system

Equipped with transparent observation hole, frequency conversion speed regulation wall scraping mixing, voltage 380V, power 0.55KW,10-120 RPM, so that the material fully mixing, mixing, refining to meet the ideal requirements. According to different products arbitrary set of homogenization time.

Emulsifying head

Emulsify material by high speed spinning, using 304 high quality stainless steel, no corrosion, and easy to clean and replace.
The material moves at high speed in the clearance between the multi-layer rotor and stator, forming strong hydraulic shear, disperses the material, and generates centrifugal extrusion, grinding, collision and other comprehensive forces.