Automatic front&back sides labeling machine
Automatic front&back sides labeling machine
Automatic front&back sides labeling machine
Automatic front&back sides labeling machine
Automatic front&back sides labeling machine
  • FEATURES
  • PARAMETER
  • CONFIGURATION

Control system: SIEMENS PLC control system, with stable operation and extremely low failure rate;


Operation system:SIEMENS touch screen, directly visual interface and easy operation, Chinese and English language change conveniently, also with help function and fault display function;

Check system: Use German LEUZE check label sensor, automatic check labeling station, stable and convenient don’t have much higher requirement with worker;

Send label system:use SIEMENS high-power servo control system, stable and high speed;

Parameter SAVE:can save 30 groups labeling parameters, when change bottles, don’t need reset parameters, just adjust the machine part is ok.

Alarm function : label spill, label broken or other malfunction during working,machine will alarm and stop working.

Machine Material:Whole machine and spare parts use material S304 stainless steel and anodized senior aluminum alloy,with high corrosion resistance and never rust;

Labeling way :  Servo system;

Low voltage circuit all use German Schneider brand.


Conveyor belt


    The conveyor belt is suitable for different sizes of products, the width between the conveyor belt can be adjusted according to your products, to ensure the smooth and safe movement of products on the conveyor belt.

    Equipped with sensors, when there is a product through, sensitive recognition, through the internal system to send signals to the labeling station.




Labeling worktable


    Core principle:  putting the product on the conveyor belt,sensors detect the product after, back to the signal to the labeling control system, in the appropriate position control system control corresponding motor send labels and attached with a stay in product labeling position, The product goes through the labeling device,the label belt drives the product to rotate, and the attached action of a label is completed.



  In addition to,If you're looking for labeling machinebottle labeling equipmentsticker labelling machine pricelabelling equipmentautomatic labeling machinesticker labeling machineautomatic labelling machinecommercial labeling machine+labeling +machine+automatic +labeling +machine,Please feel free to visit our website.

   In short, we will try our best to provide you with satisfactory service,the following is our customer feedback.



Model
MIC-DT60
Driving Mode
Servo motor
Yield(pcs/min)
20-180( depends on bottle and label sizes )
Operating direction
Left or Right
Conveyor Speed(m/min)
≤40
Labeling Accuracy
±1.0 mm
Label roll inner diameter
76 mm
Label roll outer diameter
350 mm(max)

The suitable size of label

Standard size: H: 15-180 mm  L: 15-300 mm

(Other size can customized )

The suitable size of bottles
Can customized
Printer device use air
5kg/cm 2
Power(w)
1000W
Weight(kg)
350
Conveyor height
950±50mm (Height can customized)
Machine size
3000(L) l800(W) 1800(H)mm
Voltage (In China)
AC220V 50/60HZ Single phase
(Can customized )
PLC control system
SIEMENS
Touch-screen
SIEMENS
Labeling engine Servo motor
American AB
Labeling engine Drive
American AB
photoelectric sensor
(check bottle)
Japan KEYENCE
Photoelectric sensor (Check opaque label)
German Leuze
Photoelectric sensor (Check opaque and transparent label)
German Leuze
Main transport motor
SwitzerlandABB
Press bottle motor
SIEMENS
Press bottle driver
SIEMENS
Separate bottle Motor
German JSCC
Product Catalog